I said I’d show the fabric I dyed at my Sue Benner workshop, but let me warn you my results aren’t swoon worthy. Painting with dye can be tricky. The reds will gallop ahead and take over any space they can. The turquoises will be shy and often show up very late. Spray bottles will be temperamental and drop blobs where you want a haze. Thickening the dye helps, but it can be difficult for a neophyte to gauge how thin or thick a line a squeeze bottle will draw. My point is often you won’t know what you’ll get until you wash and dry the fabric.
I’ll begin with fabrics that began as black painted or monoprinted on fabric. A second pass added color.
In the above I splodged on black from a squeeze bottle and dragged a comb through it. After it sat for a few hours I put a vinyl bathmat under the fabric and rollered on several colors of dye.
In this one I applied the black to the tile board with a paint brush, dragged a notched tool through it, and then used a wipe away tool to remove the black. I laid my fabric on top of the board and rollered over the cloth to take a print. Once the cloth was dry I painted thickened yellow and turquoise dye onto a sheet of vinyl and pressed the vinyl paint side down onto my fabric.
For this one I painted thickened black on my board with a brush, made the curved Xes with the wipe out tool, pressed the cloth over it, and let it sit overnight without washing. The next day I used a stencil to add the green and yellow thin dyes.
Again, I used thickened black dye patterned with a kitchen scrubber and a comb on my tile board. I took the print, let it sit about 2 hours, and then added red and blue violet thin dyes. You can see how the red spread out.
Next, I took up brown thickened dye.
First I applied pale apricot thin dye using a stencil (a vinyl place mat). Next I placed a foam stamp under the fabric and rollered thickened brown dye over it. Then, a fellow student introduced me to felt tip type markers that you fill with your own ink or thin dye. I used that to make the boxes.
I combined a stencil, a sponge and a spatula to make the background. Then I used squeeze bottles to apply the red and turquoise. I had hoped the turquoise would spread out more but that wasn’t to be. I think if I had sprayed chemical water (don’t ask) over the fabric before the turquoise went on it would have spread.
For this one I painted two layers over splotchy turquoise and gold. The first layer of thickened turquoise was applied with a brush on vinyl, which was pressed onto the cloth. I used a squeeze bottle for the second layer of metallic gold paint.
Several other fabrics were less successful in that there’s still a lot of white showing. Like I said, I found it tricky to assess the amount of dye to use. The good news is that I can over dye them easily. If any of my fabrics come out well, I’ll show them off to you. Otherwise, they’ll get cut up and used in supporting roles.
Here’s some tool nerd information for those of you who might be interested. The Kemper wipe out tool is about the size of a pencil with silicone rubber shaping edges at both ends. It came with my class kit. The felt tip markers are designed for ink but work with thin dyes. https://www.imaginecrafts.com/learn-fantastix