In my latest effort to quilt without quilting I played around with old free motion quilting practice pieces that were underwhelming to begin with, figuring I had no worries about ruining them. I found them when I sorted through my stash of made objects to see which needed a new home. I pulled out paint and paintstiks to gild these weeds in hopes of improving them.
Occasionally I try to work with pastels and the typewriter piece is an example of why I don’t use pastels more often. I just don’t get them. Anyway, I thought some letters would go with the typewriters. I used fabric paint and large letter stencils I had.
For another failed pastel FMQ piece I rubbed a paintstik over the lighter areas. I like how highlighting the quilting gives the insipid yellows and pinks more depth.
When I washed the pieces I found that I must have used all cotton batting as they took on serious crinkling. I may hang the QUILT one on the door to my studio or donate it to my guild for the refreshments table. I know it’s completely machine washable. The other one may await a lover of pastels.
About two years ago I pieced a top based on a RaNae Merrill pattern. It was inspired by some hand dyed scraps from Vicki Welsh and augmented with a black gradient and graduated gray fat quarters from her Etsy shop. It’s been hanging in my fabric closet waiting for me to summon the courage to free motion quilt it.
Two weeks ago I pulled it out and forced myself to quilt it before I could start another project. I wanted the quilting to give the effect of clouds scudding across a night sky as the moon rises. I laid vinyl on top and drew quilting designs. Because the color values change so dramatically, I decided it was futile to mark my quilting lines.
Six different thread types and a lot of ripping out later, I decided to call this done. The black fabric on the left side of the photo is being auditioned for a binding.
I used Aurifil 50 weight cotton, Sulky 40 weight solid and variegated rayon, and Sulky Holo Shimmer threads. The last I found hard to work with – lots of breaking, knotting, not stitching well – even with the use of a spool stand. Finally, by accident I discovered that Superior polyester invisible thread in the bobbin made my stitches work.
My moons have extra batting to prevent the seam allowance from showing.
I had issues with the long quilting lines that run from side to side. Forget stitch regulators. I want a quilt bulk regulator.
My backing fabric does a great job of hiding my stitching. In fact, I hard a hard time finding the stitches when I had to rip them out.
I don’t know whether to put a binding on this with the black grunge fabric I have or face it. I’m in no hurry. This won’t be hung in my house any time soon as my husband’s reaction was, “that’s really dark.”
Besides work on two longer term projects that I tweak a bit each day, I’ve tossed off a few palate cleansers made with scraps on hand.
Spring @ 60 MPH is now done. I even washed it to get rid of the Elmer’s school glue I used in the binding process. I combined walking foot and free motion quilting and now wish I had done all walking foot quilting. My FMQ is a lot better on a 16 square than on a larger piece.
This qualifies as my most frugal quilt of the year as I used mostly 2.5 inch strips I had, and a piece of fabric I was given for the back.
My FMQ was better on a small improv piece I call Dappled. I used scraps I had sewn together previously, plus binding leftover from another project.
Then, I did more work on two improv pieces I started about a year ago. The one shown first, My Brain On Xmas, is weird enough to have left my husband speechless.
The “brain” fabric is a paintstick rubbing of a kitchen trivet. The dog fabric is a bit of Indonesian print I’ve had since the 1970s. Yes, there’s Christmas fabric in there. All the blue/green/yellow fabric was hand dyed.
I began the other improv piece at the same time, as you can see by the shared fabrics. I hope to use an empty frame with a mat to display a small quilt, and this piece was the only one with a chance of fitting the frame. I’ve added strips to make it fit the mat opening. So much for carefully considered design.
A few posts back I was moaning about my free motion quilting problems and mentioned the special low tension bobbin case I had ordered for my Janome. I tried it out over the weekend and found that my eyelashing and other tension related issues are gone.
This bobbin case looks just like the regular one, except that the arrow to help you line up the case is blue, not red.
I tried it out on an old UFO left over from a class on circles. Here’s the back.
And the front.
My tension issues are pretty much gone. Now if only my other free motion deficiencies could be fixed as easily. I think I’ve run out of remedies I can buy.
I’ve had the most frustrating two days with my Janome 6500, normally a dependable machine. I’ve been tackling the pile of tops that need free motion quilting and realizing, yet again, that free motion and I rub each other the wrong way.
Now, a dirty little secret of my Janome is that for free motion quilting you must use bobbins made/sold by the manufacturer, not the generic ones sold to fit several brands of machines. If you don’t, your machine will seize up and leave a thread barf ball on the back after you cut your top loose. This sudden stopping does serious damage to any quilting rhythm you have going.
So I’m doing my usual improv free motion quilting on a piece I call “Rust Never Sleeps” using my official Janome bobbins, and my machine seizes up four times in half an hour. Somehow the bobbin comes unseated in the bobbin case, though I don’t know if that’s the cause of the jam or the result of the thread getting caught and pulling the bobbin up. As soon as you cut the bobbin thread the bobbin drops back into the case. This doesn’t happen with the feed dogs up.
Between all the seizures I changed my thread and my needle, cleaned out the bobbin case, and changed to another bobbin entirely. Since the problem persisted I decided two possible causes of the fault remain – either my bobbins aren’t winding right or my bobbin case has gone rogue.
I plan to try winding my bobbins on my Elna, which uses the same bobbins as the Janome. And I found something called a low tension bobbin case for free motion quilting on Amazon. At $28 it’s a lot cheaper than a trip to the sewing machine store where a look-see would cost at least $100, and no one seems familiar with free motion quilting. Maybe I’ll buy a new regular bobbin case as well. That would be an additional $30.
If you know of any solutions to my problem please send them along.